Material: UL approved Nylon 66, 94V-2, With good tensile strength and insulation, not easy to get aging.
Operating temperature:-35C to 85C.
Color:Natural(or white, standard color),UV black and other colors are available.
Nylon is inherently susceptible to environmental conditions. Pa66 cable ties are moisturized to optimum performance level at machine-side and should be stored in cool and dry areas out of direct sunlight. Cable Ties are packaged in plastic bags and should remain sealed until ready for use.
Max.Bundle Dia. E (mm)
Min.loop Tensile Strength
Quality judgment test
A good nylon cable tie should be clear and clear, even if the color is slightly yellow, it will not be harmful, and it should not be cloudy or black. The quality of the materials is also a key point of quality. After the plastic is subjected to multiple high-temperature melting screw shearing, the molecular structure state will change, especially for the raw material PA66 for making nylon cable ties. The superior wear resistance and stretchability make this product a rich application in the cable tie.
2. Performance quality
The most important evaluation of nylon cable ties is the release force, which is applied to a certain strength. Whether it is broken or reversed, the head is cracked. How to break the method must be above the nominal value. As for some users, The quality of the cable tie is not good. Some parts are related to the selected specifications. It cannot be said that the quality of the cable tie is not good, because the standard value of the product of a specification is bottomed, and the force required when using the state exceeds the standard. If you are big, you can't guarantee it. You can only choose to replace the product with higher pull specifications. Of course, the cost will rise, and there is no way to do this. Of course, the good quality of the cable tie is flexible, and the ductility is excellent, and there is no direct fracture cross section and no brittleness. In this way, the scope of application of the user's pulling force requirement can be more satisfied, thereby achieving the possibility of reducing the cost.