High-quality pvc,comply with 94v-0
Fixed the bottom duct first and put wires in duct then close the
Saddle design provide maximun stablility to wire bundles.Used in stage,
Composed easily, not peel, smooth match and won't be hurt.
Composed of bottom duct and cover cap, slot holes in both side.
1.Excellent for telephone wiring and suitable for public area like Telecom Bureau.
2.Aesthetics.High impact.Complete protection.Dust-free.
3.Easy insertion and removal of wires and cables.
Standard Mounting Holes
SGS, RoHS, CE
+122 °F (+50 °C)
3-15days (Depend on your order quantity) after confirm order.
1) The trough is flat without distortion, the inner wall has no burrs, the joints are tight and straight, and all kinds of accessories are complete.
2) The connection of the cable trough should be flat, the joints should be tight and straight, the trough cover should be flat, no warp angle, and the outlet port is in the correct position.
3) When the trunking passes through the deformation joint, the trunking itself should be disconnected, and the connecting slot should be connected in the trunking. It should not be fixed. The protective grounding wire should have a compensation margin. One wire bolt is fixed below the CT300*100 and Hengdan. Two bolts must be fixed above CT400*100.
4) All non-conductive parts of non-metal trunking should be connected and bridged accordingly, so that they are integrated and integrated.
5) The cable troughs laid in the shaft and the troughs passing through different fire zones shall be equipped with fire barriers according to the design requirements.
6) The length of the steel wire trough at the straight end exceeds 30m plus the expansion joint, and the cable trough is provided with a compensation device across the deformation joint.
CONTAINED WIRE(1.5 2 )