Product Details
Description
The AC wire duct has an opening throughout the length of the pipe, allowing the cable to be easily disconnected at any point of the run length. This applies to areas where multiple workstations or network device areas are far enough away that the cable needs to exit at several points to connect components without having to run them from the start and end points (which will fail). It also allows you to view the cabling without removing the top for easy identification.
Basic information
1.Material: high-quality PVC
2.Structure:Consists of cover and bottom,features parallel holes on both sidewalls to facilitate cutting in wire application.
3.Good design and advanced process.strongly united for cover and bottom,smoothly covers,no edges,all that protect the wires efficiency
4.Color : white or other colors upon request
5.2M length as usual or according to clients’ request
ITEM.NO. | H×W | CONTAINED WIRE(1.5 2 ) | LENGTH |
PXC-2015 | 20×15 | 5-10PCS | 2M |
PXC-3015 | 30×15 | 5-15PCS | |
PXC-4025 | 40×25 | 20-40PCS | |
PXC-5015 | 50×15 | 25-35PCS | |
PXC-6040 | 60×40 | 90-100PCS | |
PXC-8035 | 80×35 | 160-180PCS | |
PXC-100100 | 100×100 | 300-400PCS |
Feature
A. Non-conductive: Good insulation, able to resist 25kv voltage, assuring a safe system.
B. Fire resistance: Self-extinguishing, do not support combustion.
Application
The cable trunking is a fully enclosed cable tray. It is ideal for laying computer cables, communication cables, thermonuclear cables and other high-sensitivity control cables. It provides excellent control of cable shielding interference and cable protection in severely corrosive environments.
Picture
Previous: Cable Trunk
Next: Electrical Ducting
Inquiry